Results 1 to 7 of 7

Thread: 515g in tuba 36

  1. #1
    Senior Hostboard Member valhallax's Avatar
    Join Date
    March 5th, 2006
    Posts
    542
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    1 Post(s)

    Post

    was just reading in another post here that the 515g would work well in this enclosure. i just happen to have a pair here from gpa. where do i find some guidance in this area. old guy, you think this is a viable sub? im currently running kilomax's in 28cuft boxes, not all that impressed, and would like to keep my system all altec

  2. #2
    Senior Hostboard Member
    515g in tuba 36


    Old Guy's Avatar
    Join Date
    June 23rd, 2003
    Posts
    6,359
    Follows
    0
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    62 Post(s)

    Post

    The 515G is probably the best shot if you want an Altec subwoofer.

    The parameters aren't optimum, but from what I've gleaned, some optimization can be done.

    Have you read the forum posts at the site?

    Just a note- Fitzmaurice has a bit of PT Barnum in him. But the stuff does work..

    Here's a link to the Tuba forum.

    http://billfitzmaurice.com/phpBB2/vi...436a1d8cc1f8ff

    There are people there who've built several different models and could answer questions much better than I.

  3. #3
    Senior Hostboard Member valhallax's Avatar
    Join Date
    March 5th, 2006
    Posts
    542
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    1 Post(s)

    Post

    after reading a little on the tuba, ive gleamed it will only yeild good response to about 30 hz. did i read that right? my system is currently very prominent in this range. guess im looking for something along the lines of an infrasub. read somewhere here that gm uses a couple of 515b's in a sub configuration. anyone have suggestions? by the way, on a different note, along the same lines.. winisd says a 420a will get to 19 hz in a 46 cuft box. comments welcomed

  4. #4
    Senior Hostboard Member
    515g in tuba 36


    Old Guy's Avatar
    Join Date
    June 23rd, 2003
    Posts
    6,359
    Follows
    0
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    62 Post(s)

    Post

    which Tuba did you look at? there is a version of the 36 usable to 15 hz.

    If your systen is good at 30 hz, you won't gain a lot from another 10 Hz IMHO.

    I sincerely doubt you are going to get lower than a Tuba 36 with Altec drivers.

  5. #5
    Senior Hostboard Member
    515g in tuba 36


    Old Guy's Avatar
    Join Date
    June 23rd, 2003
    Posts
    6,359
    Follows
    0
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    62 Post(s)

    Post

    Actually, the more I think about it- I'm haveing a real problem believing Kilomax flat to 30 hz- from what I know of that driver I have sincere doubts.

  6. #6
    Senior Hostboard Member valhallax's Avatar
    Join Date
    March 5th, 2006
    Posts
    542
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    1 Post(s)

    Post

    actual stastics are really unknown to me as my rta only goes down to 40 hz. its just what winisd has sim'd for me. tuba 36 would probably take up less room in my living room , which is getting a little crowded. had a lady over the other night and she loved the sound, but thought the 210's were a lil much for contemporary decoration. hmmm, i said. i'll look into the tuba a little more. im going to need a good winter project anyway

  7. #7
    Senior Hostboard Member
    515g in tuba 36


    Old Guy's Avatar
    Join Date
    June 23rd, 2003
    Posts
    6,359
    Follows
    0
    Following
    0
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    62 Post(s)

    Post

    Actually, indoors is a bit different- lots of things going on.

    I always liked to do RTA tests outdoors, the concept being to get a handle on the speker by itselff, then deal with the room.

    One thing about a horn sub- the dynamics are totally different, compared to a direct radiator.

    Horns often sound like they haxe more response, just because of superior transients.

    the old you pays yer money and... applies.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This forum has been viewed: 28131802 times.